Caple C891C Spezifikationen PDF herunterladen (Seite 15)

Photographing with Self-Timer

Push down the self-timer switch, and the LED will start

flickering, indicating that the self" timer is put into operation.

The duration that the self-timer remains set is about 10 see, and

the instant at which the shutter may be released with the

flickering of the LED getting gradually faster.

Shield the eyepiece: When the self-timer is to be used, or when a picture is to be taken with the eye kept

detached from the eyepiece, place the eyepiece cap in the accessory grooves so that stray light will not fall into

the eyepiece. Otherwise, the correct exposure will not be assured.

B (Bulb) Exposure

The B (bulb) exposure mechanism is used for an exposure of more than three seconds.

Set the shutter speed dial to B and depress the shutter button, and the shutter will be

opened. When the finger is detached from the button the shutter will be closed. If your

camera is set to manual and a desired shutter speed, a longtime exposure may be

made.

· For a protracted exposure with B (bulb) exposure, use new battery cells.

· For a time (B) exposure, it is advisable to use a tripod and a Konica Cable Switch which are available from

your photo dealer.

· Fit the cable switch into the accessory terminal connector. The accessory terminal connector is also the

attachment point for a Radio Control Set and Intervalo Timer.

4.butkus.org

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

Keine Kommentare

Caple C891C Spezifikationen Seite 15