Caple C891C Spezifikationen PDF herunterladen (Seite 16)

Photography with the Auto-Winder

The Auto-winder F. used in conjunction with the Konica FC-1

makes possible auto-loading and continuous shooting at 1.5 frames

per second.

Continuous Shooting -Continuously depressing the shutter button

permits continuous shooting. Linked up with a shutter-priority AE

meter moving objects in a location with strongly varying light can

be continuously shot.

Single frame shooting - If the shutter button is immediately

released after the shot is taken, one frame shooting become possible

with the film automatically advancing one frame at a time.

Mounting to the camera - Turn the Auto-winder power switch to "OFF',, insert the guide pin into the guide

hole on the bottom of the camera body, line up the mounting screw and tighten the mounting knob firmly.

Auto-loading

1) Please be certain to turn OFF the auto winder power switch.

2) Load the film the same as is normally done without, the auto

winder; that is, pulling out the film lead for enough to cover the roller

and loading properly.

3) Close the back cover and turn ON the Auto winder power switch.

The auto winder's red operation lamp will turn on and the film will be

automatically advanced to frame 1. The film transport flicker turns at

this time, indicates that the film is moving properly.

Film Rewind

1) When finished shooting a roll, the auto winder will stop and the operating indicator lamp will come on. Turn

off the auto winder power switch.

2) Rewind film by firmly depressing the rewind button on the bottom of the auto winder, which is linked up to

the camera.

Electronic Flash Photography

During the night or in a dark room where AE photography is unsuitable, the use of the Konica X-24 Auto

electronic flash is recommended.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Keine Kommentare

Caple C891C Spezifikationen Seite 16