Caple C891C Spezifikationen PDF herunterladen (Seite 17)

To use the Konica X-24 Auto Flash

1 ) Use four AA Alkaline or nickel cadmium rechargeable batteries

to power the Konica X-24 auto flash.

2) Attach the X-24 auto flash to the hotshoe a top the Konica FC-1

camera and set the F value scale to distance green (f5.6) or close

range red (f11).

3) When the X-24 autoflash is charged--ready to shoot;

a. the shutter speed will automatically change to 1/100th second flash sync speed.

b. the aperture will automatically change to f5.6 or f11 as preselected on the X-24 scale.

c. the LED in the viewfinder at f5.6 or f11 will pulse indicating that the flash is ready.

If the picture is taken before the flash is ready, the picture will be exposed in AE mode. Be sure to observe the

under/over exposure warning signals.

The range for automatic flash is:

ASA 100 film f5.6 2.3 - 14.1 ft (0.7 - 4.3m)

f11 2.3 - 6.9ft (0.7 - 2.1m)

ASA 400 film f5.6 3.3 - 28.2 ft (1.0 - 8.6m)

f11 2.3 - 14.1 ft (0.7 - 4.3m)

· With flash photography using the self timer, check that the charge is complete before depressing the self timer

switch

· For shooting at stops other than X-24 please refer to the manual. However, please note the following in respect

to shooting at X-28.

Use of Other Types of Electronic Flash Units

An electronic light with a hotshoe, such as the Konica X-28, X-20 and X-14, may be electrically connected

simply by fitting it to the hotshoe clip.

With an electronic light without a hotshoe connector, insert the plug of its cord into the X flash contact taphole

of the camera body.

1) set the shutter speed to 1/60 sec. for all types electronic flash except Konica X-24 Autoflash.

2) set the lens aperture manually per the instructions of the electronic flash unit.4.butkus.or g

3) when using automatic flash units such as the Konica X-24, set the lens aperture as indicated by the autoflash.

4) for manual flash units, determine the correct aperture to set by dividing the guide number by the camera to

subject distance. Example: Using ASA 100 film with a Konica X-20 flash, you will get a guide number (GN) of

20, divided by the distance (5 meters) results in a lens aperture of f4 (20 . 5 = 4).

Synchronized with M. FP and MF bulbs at 1/30 sec. and slower shutter speeds.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

Caple C891C Spezifikationen Seite 17