
Apple II Computer Info
4 (1 MB) L, L, L, R, R
8 (2 MB) R, L, L, R, R (This should be your current setting)
Using 1 MB SIMMs:
1 (1 MB) L, R, R, L, L
2 (2 MB) L, R, R, R, L
4 (4 MB) L, R, R, R, R
8 (8 MB) R, R, R, R, R
> 5. What precautions should I take?
When buying the SIMMs, make sure you get ones that will work on a Mac
Plus, SE, or II.
IBM SIMMs (9 way) should also work, but I've heard of some people who
have had problems.
If you're installing less than 8, make sure you put them in the correct
slots. The first SIMM goes in the top of the group of two slots, the
second below that, then fill the group of six slots from the top.
The only valid combinations are 1, 2, 4 or 8 SIMMs.
--
David Empson
Snail mail: P.O. Box 27-103, Wellington, New Zealand
Path: news.weeg.uiowa.edu!news.uiowa.edu!uunet!ddsw1!panix!not-for-mail
Newsgroups: comp.sys.apple2
Subject: Re: need OctoRam manual
Date: 27 Feb 1994 19:38:17 -0500
Organization: School of Visual Arts: Video Junkies
Lines: 42
NNTP-Posting-Host: panix.com
X-Newsreader: TIN [version 1.2 PL2]
: As the heading implies I am searching for instructions on how to set my
: OctoRam cards jumpers to accept 1 meg SIMMS. Any help would be Appreciated.
The following are the jumper positions for the 1Meg SIMM configurations:
- [ ] means jumper over middle and right pins
[ ] - means the opposite
=========================
[ ] -
- [ ]
- [ ]
[ ] -
[ ] - FOR 1 MEG
[ ] -
- [ ]
- [ ]
- [ ]
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 320 of 572
Kommentare zu diesen Handbüchern