Caple C871i Bedienungsanleitung Seite 511

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 572
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 510
Apple II Computer Info
which uses the info supplied by Wayne Stewart and adds a few extra details:
>>
What are the connections for a CGA video cable to the
molex connector on the TrackStar E?
The cable has an 8-pin female molex connector going to a 9-pin
Dsub9 male plug.
-key- 1 2 3 4 5
]oooooooo[ ' ' ' ' '
87654321 ' ' ' '
6 7 8 9
(connectors viewed from front)
Molex Dsub9
on TS to PC CGA video output
1* - - - - - 1 Ground
2 - - - - - - 7 Reserved
3 - - - - - - 3 Red
4 - - - - - - 4 Green
5 - - - - - - 5 Blue
6 - - - - - - 6 Intensity
7 - - - - - - 8 Horizontal Drive
8 - - - - - - 9 Vertical Drive
*Pin 1 is usually marked "1" on circuit board.
Pin2 of the Dsub9 has no connection. There's also a ground wire that
goes to the outside of the Dsub9 plug.
Pins on board viewed looking at the front (chip side) of the board:
_______________________________________
--- keyway --- |
. . . . . . . . |
1 2 3 4 5 6 7 8 |
|
|
Wayne Stewart
11 March 2001
<<
>
> ok a 3rd question:
> the circuit board and ribbion wire thing you plug into the Floppy Controller
> of the PC, then into a 360k floppy and a output connector on the lower left of
> the Trackstar: Anyone know a source for these or again, pin outs and how the
> board works??
>
....
I do not have info on the pinouts. The Trackstar E manual has a few pictures
showing setups using a big ribbon cable and small adaptor board which originally
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 511 of 572
Seitenansicht 510
1 2 ... 506 507 508 509 510 511 512 513 514 515 516 ... 571 572

Kommentare zu diesen Handbüchern

Keine Kommentare