Caple C871i Bedienungsanleitung Seite 353

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 572
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 352
Apple II Computer Info
#############################################################################
### FILE : pcsticks
#############################################################################
### Created : Friday, September 27, 1996 Modified: Friday, September 27, 1996
### File Type: "TEXT" File Creator: "LMAN"
### File Size: 4026 bytes 3 KB
#############################################################################
Path: news.uiowa.edu!news.physics.uiowa.edu!math.ohio-
state.edu!cs.utexas.edu!news.sprintlink.net!news-peer.sprintlink.net!news-
peer.gsl.net!news.gsl.net!portc01.blue.aol.com!newstf01.news.aol.com!newsbf02.news
.aol.com!not-for-mail
From: [email protected] (RUBYWAND)
Newsgroups: comp.sys.apple2
Subject: Re: Looking for connecting Pc game port and Joystick IIe
Date: 19 Sep 1996 09:46:58 -0400
Organization: America Online, Inc. (1-800-827-6364)
Lines: 109
Message-ID: <[email protected]>
References: <[email protected]>
NNTP-Posting-Host: newsbf02.mail.aol.com
X-Newsreader: AOL Offline Reader
In article <[email protected]>, Philippe Collard
>
>Has anybody the wiring sheme to adapt an Apple Joystick IIe to a PC game
>port ?
>
>
Below are pin-outs and info for Apple II and PC joysticks. As you can
see, there are three major points of difference:
1. The Apple II stick uses a 9-pin plug vs. the PC's 15-pin plug. (Older
Apple II sticks may use a 16-pin plug which fits in an IC socket.)
2. The Apple II stick's X, Y controller potentiometers are a bit larger.
3. The buttons are wired differently.
You can use an Apple-to-PC adaptor to handle plug conversion; or, you
can replace the entire cable with one from an old PC stick.
The PC will work with 150k pots; but, in some applications, you may
notice a tendency to max out early in the stick swing. You can correct
this by connecting a 300k resistor across each pot (from the center to the
end with a wire going to it).
The difference in button wiring is the main reason an Apple-to-PC
conversion involves opening the joystick and making changes. (The Apple
stick has a slightly more complex, less flexible circuit. Apple-to-PC is
not as easy as PC-to-Apple.)
Basically, you need to change the Apple stick's button wiring so that
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 353 of 572
Seitenansicht 352
1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 571 572

Kommentare zu diesen Handbüchern

Keine Kommentare